How to Compare Silicone Quotations Line by Line: Tooling, Unit Price, MOQ Tiers and Hidden Costs

HOME >> BLOG

How to Compare Silicone Quotations Line by Line: Tooling, Unit Price, MOQ Tiers and Hidden Costs

Time:2026-11-13
Read:8

Two silicone quotations that differ by 30% on unit price frequently deliver the same landed cost once tooling amortisation, packaging, yield assumptions and freight terms are normalised — and the cheaper one is sometimes the expensive one. The practical conclusion for buyers: never compare headline numbers. Force every supplier onto the same line-item structure first, then compare each line against benchmarks you can defend.

What a complete quotation should contain

A professional silicone or soft-PVC quotation is a scope document, not a number. Before comparing anything, check that every offer contains these elements; a missing line is usually where the risk hides.

  • Tooling: cavity count, steel grade, mould life guarantee (shot count), ownership terms, and whether sampling costs are included.
  • Unit price: at which order quantity, in which currency, valid until which date, and on which Incoterm.
  • Material specification: compound grade or hardness range, and whether food-contact grades (for example FDA or LFGB-compliant materials) are included in that price or cost extra.
  • Secondary operations: printing, spray coating, assembly, debossing — each priced separately or explicitly declared as included.
  • Packaging: polybag only, or retail-ready box with artwork; who pays for packaging tooling such as box dies.
  • Sample policy: pre-production sample cost, courier terms, and how many revision rounds are included.
  • Validity and price-adjustment terms: raw-material price clauses, exchange-rate assumptions.

The tooling line: what you are actually buying

Tooling quotes vary more than unit prices, and the differences are structural. A low tooling number with a high unit price often means the mould cost is being recovered through the parts; a high tooling number with a low unit price can be a cavity-count story. Compare tools on the same basis before anything else.

Tooling line itemWhat to checkWhy it moves the number
Cavity countCavities quoted for the unit price shownAn 8-cavity tool halves cycle-driven unit cost versus a 2-cavity tool
Steel gradeP20 vs S136/H13-class tool steelHarder steel costs more upfront but sustains far more shots
Mould lifeGuaranteed shot count and re-cut policyA tool that dies at 100k shots mid-programme is a hidden re-tooling cost
SamplingFree first samples or charged, revision roundsTwo extra sample rounds can add weeks and real courier cost
OwnershipWho owns the tool after paymentDecides whether you can move the tool if you change suppliers

The unit price line: anatomy of the number

A defensible silicone unit price decomposes into four drivers. Ask each supplier to state their assumptions; when two quotes differ, one of these four is usually the reason.

  1. Material weight. Part weight in grams times compound price, plus a sprue and waste allowance. Heavier walls mean proportionally higher material cost — check that both suppliers quoted the same 3D file and wall sections.
  2. Cycle time and cavities. Shots per hour divided by cavities sets machine capacity per part; long cure cycles on a low-cavity tool quietly inflate unit price.
  3. Secondary operations. Deflashing, printing, coating and assembly each add labour. A quote that bundles these looks higher but removes later surprises.
  4. Yield and inspection. An assumed defect allowance of 1% versus 3% shows up directly in price. Higher assumed yield with no inspection plan is a risk, not a saving.

MOQ tiers and price breaks

Most factories quote tiered prices, and the breakpoints differ between suppliers, which distorts naive comparisons. Supplier A may be cheaper at 5,000 pcs while Supplier B wins at 20,000 pcs because their cure cycle is faster. Build a small comparison table across your realistic order quantities instead of comparing a single tier. Also check what the tier price assumes about colour changes: multi-colour parts that require compound changes per shift carry changeover time that some suppliers hide inside a flat price and others itemise.

Hidden costs that move the landed total

The most expensive surprises live outside the unit price. Before selecting on price, walk this checklist against every offer:

  • Freight term mismatch: FOB versus DDP quotes differ by ocean or air freight, insurance and destination charges. Normalise to one Incoterm.
  • Packaging tooling: colour-box die costs and print plates, often omitted until after order confirmation.
  • Testing and certification documents: third-party food-contact or REACH reports for your market, if required, are either included or billed per test.
  • Payment terms: 30% deposit with 70% balance versus 100% against shipment changes your cash cost, not the supplier's.
  • Sample and courier charges: repeated DHL shipments on long development cycles are real money on complex projects.
  • Price validity: a 30-day validity during volatile silicone raw-material periods is a future renegotiation in disguise.

Normalising two real quotes: a worked comparison

LineSupplier A (headline cheaper)Supplier B (headline higher)
Tooling, 4 cavities, S136 steel$2,400, life not stated$3,100, 300k shots guaranteed
Unit price at 10,000 pcs, FOB$0.42, printing not included$0.47, one-colour print included
PackagingPolybag only; box die extraRetail box included, die waived at this volume
Sample policyCharged, 1 revision round2 rounds included
Realistic gap after normalisingAdds print + box + likely re-tool riskEffectively lower total cost of ownership

Once each line sits in the same row, the decision usually explains itself — and you will also have a written scope document that prevents arguments later.

FAQ

Should I always pick the lowest tooling quote?

No. Tooling price only makes sense against steel grade, cavity count, guaranteed life and sampling terms. A cheap, undefined tool is the single most common source of mid-programme cost overruns in custom silicone purchasing.

How many quotes should I collect for a custom silicone part?

Three is the practical optimum: enough to expose outliers, few enough that you can normalise each offer properly. Two quotes leave no median; five or more usually produce near-duplicates that add comparison work without new information.

What if one supplier refuses to break down the unit price?

Treat it as information, not obstruction: some factories genuinely quote bundled prices. In that case, ask instead for their assumptions — part weight, cycle time, cavities, yield — which most will share, and reconstruct the comparison yourself.

Are price breaks negotiable after the first order?

Yes, and they should be: volume commitments, simplified colour schemes, or packaging changes are legitimate levers. Lock any agreed tier structure into the framework agreement so the second order does not restart the negotiation.

Next step

If you are preparing an RFQ, send us your drawings and target quantity and we will return a line-item quotation structured exactly as above — tooling, unit price tiers, packaging and sample policy separated. See our custom silicone OEM and ODM service for the quoting process, or browse custom silicone product examples for reference part families.

Related products