Silicone Coffee Maker Mat with Raised Edge

HOME / Silicone Kitchen Products / Silicone Coffee Maker Mat with Raised Edge

Silicone Coffee Maker Mat with Raised Edge

Custom silicone coffee maker mats with raised spill edge for OEM programmes. Heat rated to 230C, machine-matched sizes, custom colours and branding.
100% Food Grade Material
FDA standards, BPA-free, Lead-free, Phthalate-free
Custom OEM/ODM
Custom colors, logos, patterns, and packaging
Low MOQ
Flexible minimum order quantities for your business
Made to Order
Custom production, typically 18–25 days after sample approval

Product Details

This coffee maker mat is produced to order for small-appliance brands, coffee equipment distributors and houseware retailers. It solves a specific problem: espresso machines drip, and the drip lands on a countertop or inside a cabinet shelf. A mat with a raised perimeter edge contains it.

We mould the edge at 10–15 mm, high enough to hold a spill from a backflush or a dropped portafilter, and add a fine rib pattern on the top face so cups do not slide. The underside is smooth for full contact with the counter, which stops the mat creeping when the machine is pushed back into place.

Specifications

ItemStandard rangeNotes
Material100% food-grade siliconeOdour-neutral, coffee-oil resistant
HardnessShore A 55–70Firm edge, flexible body
Temperature range-40 °C to 230 °CUnaffected by steam and hot water
Raised edge10–15 mmContains spills
Size300 × 200 mm to 600 × 400 mmMatched to machine footprint
Top surfaceFine rib or dimple patternAnti-slip for cups
CornerSquare or roundedRounded suits countertop curves
ColourPantone matchedBlack, grey and brand colours

Customization Options

  • Footprint — sized to a specific espresso machine, grinder or knock box; send the machine model and we will match it.
  • Edge height — 10, 12 or 15 mm depending on spill volume.
  • Cut-outs — cable notch, drain hole with plug, or a recessed cup area.
  • Multi-part — mat plus a matching tamper rest or knock box mat in one set.
  • Branding — embossed logo in a corner, printed edge, or a printed sleeve.

Quality Control

Batch checks cover edge height consistency, flatness on a granite surface, colour and print adhesion, and resistance to coffee oil staining. Compounds can be tested to FDA 21 CFR 177.2600 and LFGB through accredited laboratories.

Ordering and Lead Times

Sampling typically 7–12 working days after drawing approval; mass production typically 18–25 days after sample sign-off. MOQ is usually 500 pcs per colour. Mats are produced to order to your machine footprint and colour.

FAQ

Can you match the exact footprint of our machine?

Yes. Send the machine model or a dimensioned drawing and we will mould to that footprint, including cable notches and levelling feet recesses.

Will coffee oil stain the mat?

Silicone resists coffee oils well and cleans with warm soapy water. Very light colours may show a tint over time; dark colours are the safer retail choice for this product.

Can it be used under a grinder as well?

Yes — a grinder mat usually needs a smaller footprint and a lower edge, and it is a common second SKU.

Send your machine model and target retail price for a quotation, or see the rest of the kitchen products range. If your programme also needs branded coasters or a tamper rest, those can be moulded in the same development cycle — see the OEM/ODM service.