This dish drying mat is produced to order for kitchenware brands. The functional difference between a good and a bad drying mat is drainage geometry: ribs that lift dishes clear of standing water, and a slope or channel that moves the water away instead of letting it pool under the plates.
We mould raised ribs at 5–8 mm with spacing set to let air circulate under a stack of plates, and we add a perimeter lip so water does not run off the mat onto the counter. The mat folds for storage and springs back without leaving a permanent crease.
Specifications
| Item | Standard range | Notes |
|---|---|---|
| Material | 100% food-grade silicone | Mould-resistant, odour-neutral |
| Hardness | Shore A 55–70 | Firm ribs, flexible body |
| Temperature range | -40 °C to 230 °C | Handles hot dishes from the oven |
| Rib height | 5–8 mm | Higher ribs for deep plates |
| Size | 400 × 300 mm to 500 × 400 mm | Custom sizes from new tooling |
| Perimeter | Raised lip | Contains run-off |
| Fold | Single or double fold line | Folds flat for cabinet storage |
| Colour | Pantone matched | Neutral and accent palettes |
Customization Options
- Drainage — rib field, channel to sink, or a slight slope with a corner spout.
- Format — flat mat, mat with raised dish rack, or a foldable two-panel version.
- Ribs — straight, wavy, or a grid pattern that holds glasses upright.
- Care label — moulded care symbols or printed instruction panel.
- Branding and packing — embossed logo, printed band, or a rolled pack with a paper belly band.
Quality Control
Checks cover rib height consistency, fold-line fatigue after repeated folding, flatness, colour and print adhesion. Compounds can be tested to FDA 21 CFR 177.2600 and LFGB through accredited labs.
Ordering and Lead Times
Sampling typically 7–12 working days after tooling approval; mass production typically 18–25 days after sample sign-off. MOQ is usually 500–1,000 pcs per colour. Mats are made to order in your approved size and colour.
FAQ
Does water collect under the mat?
Not if the perimeter lip and rib spacing are specified correctly. This is the parameter we tune first, and it depends on the plate depth your market uses.
Will it stain from tomato sauce or turmeric?
Silicone resists staining better than most plastics but very strong pigments can leave a tint on light colours. Mid-tone and dark colours hide this better than white.
Can it be cut to size?
It can, but a cut edge loses the sealed finish. We recommend ordering the size you need rather than trimming.
Send your sink width and typical plate depth and we will propose rib spacing and mat size, or view the full kitchen products line. Custom sizes, colours and packaging are all handled in-house — details on the OEM/ODM service page.